Best Table Saw Fences – Reviews and Buyer’s Guide

Best Table Saw Fences

You bought yourself an expensive table saw and are pretty excited to make the perfect straight cut on your latest DIY project. At the very last minute, the board veers off, and you are left with an uneven cut and wasted material.

The market is full of high-quality table saws; however, most of them consist of a cheap, poor quality saw fence. At times, it becomes crucial to change the preloaded one with a special fence from the market to ensure the safety and great cut design. However, choosing the one that does its job perfectly is quite hard; therefore, we compiled a list of the best table saws to help you out a bit.

Our list of the best table saw fences are based on extensive research, experiments with several materials and saws along with several customer reviews. Moreover, our buying guide contains the necessary factors that should be considered while investing in a table saw.

Top 3 Table Saw Fences

4.4 out of 5 stars
4.1 out of 5 stars
3.1 out of 5 stars
Wixey WR700 Table Saw Digital FenceVega Pro 50 Table Saw SystemDELTA 78-919BT2 Biesemeyer Fence

  • Extremely accurate
  • Has a sturdy foundation

  • Can be adjusted easily
  • Has a large rip capacity

  • It can fit on several saws
  • A great locking system

Table Saw Fence Reviews

1. Vega Pro 50 Table Saw System

Vega Pro 50 Table Saw System

Check the latest price on Amazon.

See the Vega Pro 50 in a glance:
  • 50-inch right blade
  • 10-inch left blade
  • Fence mounting system for full adjustment and accuracy
  • Micro adjustment with aux table support
  • Guide rails supported by brackets
  • 2-1/2-inch fence height


Vega is a renowned name in the saw manufacturing industry with a positive reputation for maximum customer satisfaction. Their Vega Pro 50 Fence is another product that doesn’t seem to disappoint its customers.


The best way to describe the Pro 50 fence is that it has an old fashioned appeal but with a modern twist. Sounds great, right? The fence caters to both professionals and regular DIY enthusiasts who are simply looking to refurbish their saw.

The fence bar has a strong foundation, while it’s composition consists of strong materials for long use. What table saw does it work with? Some people claim that it works with almost every renowned table saw in the market. It has several bolt holes structured specially for some great table saws in mind, minimizing the need to drill them yourself.

The four support plates act as a storage team, letting you store the extension table, aluminum mounts, and jacking plates. Those plates allow you to level the strafe of the fence if needed while the rear rail bracket secures the fence in place. This is a great feature, especially if you are utilizing the storage space.

Rip Capacity

It extends your table saws ability to handle bulky materials by the 50-inch rip capacity: it is 50 inches to the right and 10 inches to the left. Do you know what defines the best table saw? Just that. Most saws do not provide leeway to the opposite side, leading to fewer shifts and poor accuracy.

Furthermore, the construction of the saw is made of precisely cut rolled aluminium with an epoxy coating to make it last for long. Moving on, the glide path consists of polished anodized chrome plated surface to limit friction for smooth movements (quick and easy adjustment).

Other features

Everyone is willing to spend bucks on expensive equipment pieces, but when it comes to the shipping costs, they all run away. We understand you since we have been there, and so do the manufacturers. As a result, they offer you free shipping. How about that? It’s fast, while the reliable customer service department aims to make this experience extremely hassle-free for all the customers. Installation is extremely easy too. All you need are 30 minutes at max to set the entire saw in order and maybe more if you’ve never set one before.

What we like:

  • Can be adjusted easily
  • Has a large rip capacity
  • Can handle large, bulky materials
  • Made of premium quality materials.

What we don’t:

  • Might have some burrs. However, they can be removed

Editor’s Rating

4.1 out of 5 stars

2. Wixey WR700 Table Saw Digital Fence

Wixey WR700 Table Saw Digital Fence

Check the latest price on Amazon.

See the Wixey WR700 in a glance:
  • up to 60-inches of the total length
  • Simple mounting brackets for easy attachment to almost any rectangular or round rail
  • Large easy to read display reads
  • Mounts on the left and right side of the fence
  • Magnetic attachment for easy removal and maintenance of calibration


It’s the 21st century, and almost everything is digital. Why should our table saw fence be anything other than that? The Wixey Wr700 Digital Table Saw Fence is a great upgrade from the traditional fences that pose a threat to precision despite their claims.


How would a digital fence work? Through a meter. It has a contraption with a scale and digital unit to measure the distance from the fence to the blade with an accuracy of 0.002 foot. A few years ago, this could only be found on CNC panel saws. However, Wixey went through innovations to make this technology accessible on almost every contactor, and cabinet saw. The track comprises an aluminum build. They come in two connectable sections with a difference of 1 millimeter. Yes, you might face the initial confusion of the difference since digital meters should be precise. However, the manual clears the misconception. The track is meant for two purposes: the display supports the track while the latter supports the readout strip. As long as the strip is mounted perfectly, any misalignment of the other components is fine.


The meter never shuts down, and always the reading correct to the nearest 0.002 inches. It can be moved to your required position and locked down to display the new reading. Position in the fence isn’t a hassle either due to its amazing accuracy, while calibration can be done in a few seconds. You only need to push the fence towards the blade and lock it a few touches apart. After pressing the calibrate button, it zeroes the fence.

Other features

Most people dread the installation process. What if something breaks? What if the saw stops functioning? Saws consisting of a Biesemeyer clone fence find Wixey to be engineered, especially for them. All you need to do is drill some mounting holes (in case there aren’t any) with the drill bit, assemble the unit and use self-tapping screws to attach the unit to the saw. It hardly takes half an hour for the process to be completed.

Furthermore, aligning the track is pretty simple too. Find the ridge at the bottom of the saw (that’s where the ends of the fence meet) and use the provided mounting brackets to butt up to the ridge. After the completion of the process, it turns out to be quite sturdy and remains stationary for the most part.

What we like:

  • Extremely accurate
  • Has a sturdy foundation

What we don’t:

  • The installation process is a bit confusing

Editor’s Rating

4.4 out of 5 stars

3. DELTA 78-919BT2 Biesemeyer Fence

DELTA 78-919BT2 Biesemeyer Fence

Check the latest price on Amazon.

See the DELTA 78-919BT2 in a glance:
  • accurate 3 point locking system
  • Fits models 36-L352, 36-L552 and 36-L552LVC Type 2 Unisaws
  • adjustable for fast and accurate cuts


Working with wood is a job for many but a hobby for others. DIY enthusiasts love to create intricate designs and structures with wood. The one thing that enhanced the experience after purchasing a good quality table saw is the saw fence. The Delta Biesemeyer Fence System does a pretty great job; hence, it is a part of many saws around the world.


The Biesemeyer Fence System boasts 90% US-based construction. Due to their strict production laws, you know that the product lives up to standard quality. The components and motor are manufactured in Wisconsin while the final manufacturing is done in South Carolina before being shipped all over. The 52-inch fence system is similarly built in Anderson, SC.

Even though the construction process isn’t of much interest to many, we were pretty curious. The bent metal builds the supporting cabinet. After being cut, it’s sent for fabrication and is then powder coated. This meticulous process churns out the best pieces for maximum customer satisfaction.

The fence, on the other hand, has a simple yet effective design allowing it to glide smoothly across the table. Locking it doesn’t take much effort with the help of the three-point lock system; hence, the measurements turn out to be pretty accurate. The accuracy is further enhanced by the hairline pointer.

Power and Accuracy

Fences do not power the saw. However, the saw forms part of the Delta unisaw. The 3-5 HP American Marathon motor, American-made single-cast trunnion system, and the precision ground cast-iron tabletop are the perfect accessories when used with the fence.

The accuracy of the fence, on the other hand, is built with a lot of focus and attention to detail. The orientation of the blade goes through a rigorous testing process under feeler gauges as thin as 0.001 inches.

Fence up Front control

This is one of the most prominent features of the fence. The depth of blade control and the bevel is found at the front of the saw cabinet due to the unique single-piece trunnion system.

Other features

It doesn’t weigh a lot; therefore, you can easily fix it on lightweight table saws and carry it around. Moreover, its unique locking system allows it to fit easily on most saws, making it a universal model.

What we like:

  • It can fit on several saws
  • Has easy to read measurements
  • A great locking system

What we don’t:

  • The plastic components are not durable
  • Might comprise of low-quality metal

Editor’s Rating

3.1 out of 5 stars

4. 43″ Uni-t-fence Table SAW Fence- Peachtree Woodworking

43″ Uni-t-fence Table SAW Fence- Peachtree Woodworking

Check the latest price on Amazon.

See the 43″ Uni-t-fence in a glance:
  • 43″ Heavy-duty aluminum extrusion
  • Replaces the Stock Delta Fence
  • Simple mounting
  • 5/16 inches wide slot
  • ergonomic design with three slots, namely A, B, C, and D.


The PeachTree 43 inch Woodworking Uni-T-Fence is an amazing heavy duty fence for most professional table saws. If you are looking for an upgrade, this is a great option to consider.


The Peachtree fence comprises an extruded square design allowing you to attach it to several saws and pictures. The saw is available in two lengths: 36 inches and 43 inches. Apparently, it’s a huge upgrade from the Delta Uni-Fence Table saw system since the build consists of heavy-duty aluminum extrusion. Since some people find the anatomy of the Peachtree fence quite interesting, we decided to put it up in detail. With a 2 inch width, the fence scale adjustment isn’t required. Hence it can be interchanged between the original and copy (a bit inaccurate). The fence opening is a half-inch deep. Therefore, you can use a half-inch stock such as plywood, UHMW, and hardwood as a temporary fence face.

The Slots

As we mentioned earlier, it’s ergonomic design consists of 3 slots, namely A, B, Cand D. The A T-slot is meant for bracing fence accessories such as fence fewer-board, custom made jigs and board buddies. They use the standard 0.25-inch hex head bolts or the 0.25-inch t bolts. Moving on, the B slot is found on the fence side. Since its comparatively deeper, it requires 0.25-inch hex nuts to make the mounting of the UHMW fence easier.

Furthermore, the C T-slot is a preferable option for mounting the Uni T fence to the standard Delta Unifence guide. It has a 5/16 inches wide slot with a height of 1.5 inches. Moving on to the D UHMW Fence face, it is mounted to the fence after being predrilled. It’s a great component due to several reasons, such as high abrasion resistance with great impact strength at low temperatures. Along with this, the smooth sliding materials results in a low coefficient of friction while it’s self-lubrication quality makes it compatible with most woodworking tools. Moreover, the E slot mounts the t fence to the other saws and machine fences. The measurements are 1-1/64 inches from the bottom and utilize a 0.25-inch hex head nut.

What we like:

  • Clean cut metal ends for great workmanship
  • Amazing fit and finish

What we don’t:

  • It is a bit expensive
  • Some people get a deformed UHMW component

Editor’s Rating

4.7 out of 5 stars

5. Dewalt DW745 Saw Replacement Fence Assembly

Dewalt DW745 Saw Replacement Fence Assembly

Check the latest price on Amazon.

See the Dewalt DW745 in a glance:
  • designed to fit a 10-inch table saw
  • works best with DW745 Type 1, DW745 Type 2, and DW745 Type 3.


If you’ve been on the search for the best table saw and its accessories for a long time, there’s no doubt that you’ve come across Dewalt’s products. The manufacturers make quite a fuss every time they release a new product due to high-quality construction and unique yet innovative features. On the other hand, there’s no use of a table saw without a proper fence; hence, Dewalt introduced their DW745 table saw replacement Fence that provides customers with the service they need.


It’s designed to fit a 10-inch table saw: this is a pretty vague requirement, and due to the availability of several 10-inch saws in the market, it’s safe to assume that it might work with your saw too. However, according to the manual, the saw fence works best with DW745 Type 1, DW745 Type 2, and DW745 Type 3.

The primary job of a fence is to align the wood parallel to the blade for straight and precise cuts every time. More often than not, a poor quality fence breaks in the middle of the process, ruining the material and cut. It needs to be built of a strong material just like the aluminium based construction of Dewalt’s fence. Aluminum is known for its amazing durability and ability to resist rust and dust.

Further on, portability is one quality that most people search for since woodcutting jobs are never based at a specific station. Dewalt’s fence is relatively lightweight and can easily be carried around.

Other features

Assembling the saw is a tiring process. Replacing the original saw fence with another fence is much harder and often puts people off. This replacement fence, on the other hand, is much easier to assemble, with the process lasting for no more than 30 minutes.

You won’t need to go on an extensive search drive to find the relevant components for assembling the saw as the screws, and relevant fixtures come in the packaging.

What we like:

  • It can be assembled easily
  • Comes with the required components
  • Doesn’t weigh much

What we don’t:

  • Doesn’t work with models other than DW745

Editor’s Rating

4.5 out of 5 stars

6. DELTA 36-T30 T2 Fence and Rail System

DELTA 36-T30 T2 Fence and Rail System

Check the latest price on Amazon.

See the DELTA 36-T30 in a glance:
  • A secure fence can be clamped to front tube and rear rail
  • Steel tube fence body glides easily
  • Great for precision ripping and squaring cuts
  • Projected aluminum face
  • 3-point T square locking system accurate to 1/64 of an inch
  • Added rear hold down support


Being low on a budget isn’t uncommon, especially when you’ve spent what seems like a million bucks on a good table saw. However, a poor quality table saw fence would not work as you expect it to. Moreover, the performance might stoop down much lower than your expectations. The Delta 36-T30 T2 Fence and Rail System, on the other hand, is the perfect fence that allows you to maintain your budget without compromising on the quality of cuts.


The fence and rail structure comprises a high-quality steel build, allowing it to stay by your side for a long time. You don’t have to worry about security and stability since it is heavily bolted at every possible weak point. As a result, your fence will not break regardless of its heavy usage.

The T-square locking mechanism ensures that it’s properly locked and doesn’t shift when not in use. As a result, you get perfectly aligned, precise cuts.


Apart from the 30-inch rip capacity, the rail length is 57 inched while the fence is 37 inches long. The added rear hold down support during the use of light materials like featherboards and jigs while the easy gliding steel guide pipe and scale allows you to make repetitive steps without losing the set measurement.

Other features

As a beginner, there’s nothing more you would want in a table saw fence than user-friendly features and interface. What’s the use of the several unique features when you simply can’t wrap your head around the mechanism? Delta makes sure that every feature is beginner-friendly while its instructions manual explains the rest.

Moreover, this fence van easily fits into a variety of different saws. It doesn’t fit yours? No problem; all you need to do is to drill holes at your preferred positions and change it according to your needs.

What we like:

  • Made of high-quality materials
  • Gives accurate cuts at every go
  • A secure t locking system
  • Can be used by beginners

What we don’t:

  • The instructions manual is quite confusing
  • The plastic components are not durable

Editor’s Rating

3.6 out of 5 stars

7. Shop Fox W1410 Fence with Standard Rails

Shop Fox W1410 Fence with Standard Rails

Check the latest price on Amazon.

See the Shop Fox W1410 in a glance:
  • Can fit saws with 27-inch tables
  • Has ball bearing guides
  • Fine positioning knobs on both sides for left or right-handed use
  • Easy installation
  • Can be locked on both ends
  • Fits on most major name-brand table saws


Shop Fox came out with a number of table saws and saw fences throughout the previous years, with each being better than the other. Often rated as one of the best ones in the market, they have a great rip capacity with superior smoothness to make your wood cutting experience a great one indeed. The Shop Fox W1410 Fence is a part of our list for the very same reasons.


If you are looking for a fence for your 27-inch table saw, this Shop Fox model is the perfect option due to its reliability. It’s one of the most versatile fences we have come across due to its accuracy and unmatched strength.

The ball bearing guides allow you to move the fence using a single finger without comprising on the quality of the cut.

Furthermore, it has a rotating knob on each side. Just in case you forgot, not everyone is right-handed. Therefore, this fence can be accessed by a wider range of customers since it caters to left-handed workers as well.

Other features

If you are a beginner, a proper instructions manual is a must for both your table saw and its fence. Moving on, one of the hardest, or should we say, that the ONLY hardest part of a saw fence is the installation process. The entire saw needs to be unloaded free of its components, so the previous fence can be uninstalled for the new one to take place. However, Shop Fox makes the process significantly easier with a clear guide to reduce the installation time and prevent any faults.

You only need to lock it on the front and the back for installation while the big locking lever ensures a strong foundation and secure connection. It won’t loosen, preventing it from breaking midway and promises to last for a long time. The handle is also built with strong materials to withstand the harsh working conditions.

What we like:

  • It moves smoothly and reduces friction
  • Can be installed easily
  • Gives precise cuts
  • Can be used on both conventional and modern saws

What we don’t:

  • Has a poor tap and drip

Editor’s Rating

4.3 out of 5 stars

Buyers Guide: How To Choose The Best Table Saw Fence

Buying a table saw fence is not as easy as you think. With the market flooded with poor quality products at high prices, its necessary to be vigilant while choosing the perfect table saw fence. Our buying guide is an honest effort on our behalf to offer you the help you deserve.


There’s no other way to go ahead with the buying process except considering the compatibility of the fence with your table saw. Not every fence is for your specific saw model and neither will each fulfil your cutting needs. The rip fences have a particular range of saws they work with: it’s often mentioned by the manufacturers in the manual or on the packaging. Regardless of the heaps of positive reviews about a particular saw, it will not work for you if it’s incompatible (unless you love buying and storing expensive fences).

However, some times you may like a saw way too much. In some cases, customization deems to be a valid option by drilling new holes so to reposition the bolts. This requires a lot of time and effort; therefore, we won’t recommend it. The perfect way to check the compatibility of the fence is by measuring the table saw and choosing one that provides an accurate match.

Which one’s better? T-Square or Standard

The next step after compatibility is deciding on the type of the saw. T-Square and the Standard Fence are the most popular and commonly available options. They’re equally useful but for different procedures. The T-Square fence is a great option for woodworkers who focus on accurate geometrical shapes, eg. Square and rectangle-shaped cuts. It has a 3-point locking system, enabling it to maintain the squareness while aiding you with simple jigs and fixtures attachments.

On the other hand, the standard table saw fences are often found on the sliding table saws; they slide back and forth for accurate cuts. Moreover, they remain flat for the most part, making them extremely useful for thin materials.

What is the rip capacity?

The rip capacity is a measurement of the largest distance one can work between the blade and fence. Another important point to consider a great way of selecting one is by focusing on the materials you work with. Wide materials need a large rip capacity: 50-inch rip capacity is great for professionals who handle larger materials. On the other hand, if you work with small pieces of wood, a 30-inch rip capacity will be ideal for you.

Ease of Installation

This feature is often ignored; however, at the end of the day, it’s the most important part and greatly impacts your overall experience. The installation process is the first determination of a user-friendly table saw fence; it should be easy and quick to install. Users’ manual often does the trick. Every table saw fence has a different mechanism. However, the most common techniques are drilling holes, the locking mechanism, or the bracket.

You might spend hours trying to fix the fence on to the saw just to discover that it’s not compatible. The ease also depends on the compatibility of the saw with the fence. There should not be any extra need for drilling holes or installing several other components before fixing on the fence itself.


What else do you want a saw for except making accurate cuts? Most probably nothing. This is the most crucial condition for crossing a table saw fence. It’s compulsory to look at the degree of accuracy is provided, and this is done by focusing on the determinants. The major one is the ease of adjustment; the best table saw fence allows for micro-adjustments for great precision. Furthermore, the easy adjustment mechanism should be equally easy to run.


The construction of the table saw fence is a major determinant of its life expectancy and ability to withstand tough use. The first thing to notice about the construction is the material. Steel and aluminum are two of the most durable materials; aluminum weighs relatively less and makes the table saw more mobile, whereas it’s nearly impossible to meet the life expectancy of steel. The only drawback is the ability to rust. Another thing to avoid while buying a fence is plastic components: the more plastic components there will be, the faster will it depreciate.

Other features to look for

Despite its direct correlation with the features of the fence, your budget matters a lot. Even though it is recommended to buy the best quality tool due to unmatched precision, the price factor often becomes a barrier. However, with saw fences, you can easily find a low-priced part that does the job equally well.

While choosing the materials and scale, make sure to look at its size. For people dealing with large materials, a larger table saw is recommended due to the large surface area, while for smaller projects or workshops, a mini table saw can do the job equally well.

Thirdly, many table saws offer you an option to choose between electric or manual. Your first thought must be electric because hey, technology makes everything better. Even though the action of pushing the wood manually seems exciting at the start, repeating the action for the entire process is tedious. Therefore, an electric rip fence is recommended for preventing manual labor, saving your time and effort.

Electric fences are also a great alternative for high precision work until and unless you are a professional woodworker, making the perfect cut is hard. The electric fence switches between several measurements automatically.

Frequently Asked Questions (FAQs): About Table Saw Fences

Q: What is the fence on a table saw?

A: The rip fence, also referred to as a fence, is an integral part of every table saw. Its a guide for the woodworkers to help them achieve the perfect cut in terms of precision and safety. It runs parallel to the saw blade and resembles a basic metal bar. It’s quite easy to adjust the fence and only requires the saw operator to move it according to the width of the cut. It’s better to invest in a good quality rip fence since its value to the overall cutting experience. It is cutting at an angle or across the grain results in injuries due to kick back while the fence locks the saw blade effectively into place.

Q: What causes a table saw to burn wood?

A: Black burn marks on a wood piece ruin the aesthetic of the final project. However, we finally found a reason for it. The wood often burns due to a dull or dirty saw blade; the dull blade makes it hard to cut quickly, reducing the feed rate and causing friction. Dirt and debris might be the possible reasons for a dull blade since it builds up behind the teeth of the blade and reduces the speed. Imperfect alignment of the saw blade with the guide fence is another reason for scorch marks on the wood. The misalignment pushes the stock sideways against the fence, creating friction and pressure. Softwood like cherry and soft maple need a faster feed speed to prevent burns but takes practice.

Q: What is a table saw mitre gauge?

A: A miter gauge is a part of almost every table saw. If you’re looking for a saw that offers cross-cuts perpendicular to the grain at various angles, including 90-degree perpendicular cuts. The blade of the table saw offers 45-degree cuts by default, whereas the mitre gauge allows cuts offered only by compound mitre saw, and radial arm saw.

Q: Why does my saw kickback?

A: Kick back is a huge issue with table saws; however, most of the users don’t really know what causes it. The first thing one should know what a kickback is; it’s when a piece of wood gets stuck in the blade, causing it to rotate at high speeds towards the user.

A common reason is due to tension in aboard. The tension prevents the kerf from fully opening while cutting wood. As a result, the cuts pinch together and traps the blade leading to flow towards the user at an incredible speed. On the other hand, the cut pops apart before the process ends due to tension. Furthermore, a warped or twisted board is quite loose, and the wood drifts into the blade at an awkward angle.

Q: Does a riving knife prevent kickback?

A: Yes, a riving knife is one of the greatest features to avoid kickback. There’s no way to completely eradicate the risk of one. However, this knife minimizes the risk to a great extent. It goes up and down with the blade, preventing the board from wandering away from the table. This is essential, especially when you don’t want the board to touch the knife.


Table saws are, no doubt, quite expensive but pretty handy. However, there is no use of an expensive table saw if it’s loaded with a poor-quality fence that doesn’t do its job well.

We have provided a list of the best table saw fences along with a great buying guide to make the purchasing process hassle-free. The buying guide mentions the most important factors to consider, such as your budget, saw compatibility, size, and type of the fence to make the right decision while the list includes fences that work with several saws and provide a lot of benefits within a certain price range.

Leave a Comment